Vive Toilet Seat Riser With Handles

FEATURES
Enhanced Toilet Height
Easily fit under an existing elongated toilet seat, this toilet seat riser elevates by 3.5”, promoting comfortable sitting and standing without excessive bending. Ideal for enhancing bathroom safety for the elderly, individuals with limited mobility, and those in post-surgery recovery.
 
Effortless Tool-Free Setup
Effortlessly install this riser under any elongated toilet seat using the included screws and washers, all without the need for tools. The interior lip ensures a secure attachment, preventing slips and ensuring a safe seat.
 
Comfortable Grip Assistance
Enjoy additional support while sitting or standing with removable handles featuring soft foam hand grips for a comfortable hold. These handles offer a nonslip surface, aiding in a secure and stable grip. If desired, they can be easily removed, providing a generous 22” width between them.
 
Robust Composite Build
Built to last, this durable composite toilet seat elevator can support up to 300 pounds and is resistant to splitting, ensuring extended usability. Maintenance is a breeze; wipe it down with regular household disinfectants or sanitizing wipes. The handles, made of corrosion-resistant aluminum, are also easy to clean with traditional bathroom disinfectants.
 
GENERAL SPECIFICATIONS
 
What’s Included:
Raised toilet seat with removable handles
2pc - 6.125” long screws (Flathead)
2pc round plastic washers (1.18” outer diameter)
2pc round metal washers (0.95” outer diameter)
2pc butterfly nuts
Uses: Adds height to the toilet seat for stability and to reduce bending and twisting
Dimensions For Standard Seat:
Length of seat from front to back: 17.25”
Length of seat inside from front to back: 11.25"
Width of seat from left to right: 13.89”
Width of seat inside from left to right: 10.25”
Height of seat: 3.5”
Thickness of seat: 2”
Handle width: 22”
Handle length: 12.5”
Distance between handles: 19"
Dimensions For Elongated Seat:
Length of seat from front to back: 19.25”
Length of seat inside from front to back: 13.25"
Width of seat from left to right: 13.75”
Width of seat inside from left to right: 10”
Height of seat: 3.5”
Thickness of seat: 2”
Handle width: 21.25”
Handle length: 14.5”
Distance between handles: 19"
Materials:
Composite
Aluminum
EVA foam
How To Attach Removable Handles:
Find the right side handle marked with an “R” and a blue arrow. The left side handle is marked with an “L” and a red arrow
Slide each arm into the seat by pressing the brass pin on the arm and sliding each arm into position. Make sure the pin is facing out
You will hear a click and see the pin emerge through the positioning hole when the arm is in place
How To Install:
Remove the existing toilet seat and lid from the toilet
Place the toilet seat riser on the rim of the toilet and center as necessary. Make sure the lip underneath the riser is inside the bowl
Attach the original toilet seat and lid on top of the toilet seat riser using the included hardware. Thread the screws through the holes in the back of the seat. The plastic washers are placed on the top of the screw and the metal washers are placed on the bottom. Tighten each screw with the butterfly nuts
Care Instructions: Wipe down seat riser and handles with a traditional disinfectant solution